Don't blindly choose equipment! After reading this article, you can avoid 90% of the production pitfalls. Selecting the right equipment means saving 30% of energy consumption and increasing the oil yield by 20%. In the world of sesame oil production, choosing the right extraction equipment is crucial for enhancing both the yield and quality of the oil. Let's delve into the differences between hydraulic oil presses and screw oil presses to help you make an informed decision.
The hydraulic oil press operates by using hydraulic pressure to squeeze the oil out of sesame seeds. It applies a slow and steady pressure, which is gentle on the seeds and can preserve the natural flavor and nutrients of the oil. On the other hand, the screw oil press uses a rotating screw to crush and press the seeds. The continuous movement of the screw generates high pressure, resulting in a faster extraction process.
The hydraulic oil press generally operates at a lower temperature, usually around 60 - 80°C. This low - temperature extraction helps to maintain the quality of the oil, as it reduces the risk of oxidation and the loss of volatile flavor compounds. In contrast, the screw oil press can generate higher temperatures, reaching up to 120 - 150°C during the extraction process. While this higher temperature can increase the oil yield, it may also affect the quality of the oil to some extent.
In terms of capacity, the screw oil press is more suitable for large - scale production. It can process a large amount of sesame seeds in a relatively short time, with an average hourly output of 100 - 500 kg depending on the model. The hydraulic oil press, however, is better for small - batch production. Its hourly output is usually around 10 - 50 kg, making it ideal for home workshops and small oil mills that focus on high - quality oil production.
The oil extracted by the hydraulic oil press is often of higher quality, with a more natural flavor and a lighter color. It has fewer impurities and a lower acid value, which means it has a longer shelf life. The screw oil press, although it can achieve a higher oil yield, may produce oil with a slightly stronger flavor and a darker color due to the higher extraction temperature.
If you are a small - scale producer who values high - quality oil and has a limited production volume, the hydraulic oil press is the better choice. It allows you to produce premium - quality sesame oil with a small investment. For large - scale producers who need to maximize efficiency and output, the screw oil press is more suitable. It can meet the high - volume production requirements and is more cost - effective in the long run.
Proper operation is essential for getting the most out of your oil press. For both types of presses, pre - treating the sesame seeds can significantly improve the oil yield. For example, roasting the seeds at the right temperature can make the oil easier to extract. In addition, adjusting the pressure correctly according to the type of seeds and the desired oil quality is crucial. Regular cleaning is also necessary to maintain the performance of the equipment. For the hydraulic oil press, it is recommended to clean the hydraulic system every 1 - 2 months, while the screw oil press should be cleaned after each use.
During the operation of the oil press, you may encounter some common problems. For example, if the oil output is low, it could be due to improper seed pre - treatment or a clogged filter. Check the pre - treatment process and clean the filter regularly. If there is abnormal noise, it may indicate a problem with the bearings or the screw. Inspect these parts and replace them if necessary. For the hydraulic oil press, if there is a hydraulic oil leak, check the seals and hoses for damage.
Many users have shared their experiences with these two types of oil presses. A small - scale oil producer in rural China said that after switching from a screw oil press to a hydraulic oil press, the quality of their sesame oil improved significantly, and they were able to sell it at a higher price. Another large - scale oil mill reported that the screw oil press increased their production efficiency by 30% and reduced their labor costs.
When choosing between a hydraulic oil press and a screw oil press, consider your production scale, quality requirements, and budget. By understanding the differences in their working principles, performance, and operation techniques, you can select the equipment that best suits your needs. Don't miss this opportunity to optimize your sesame oil production process!
.jpg?x-oss-process=image/resize,m_fill,h_300,w_300/format,webp)
